Smart lock maintenance tips Do you know?

Release time:

2023-06-20

The following is a super practical smart lock maintenance handy tips.

A. Smart lock cleaning

Regularly wipe the surface of the smart lock with a dry cloth or paper towel gently, do not use water, alcohol, acid or other chemical cleaning or maintenance of the smart lock. It is worth noting that the smart lock with a long time, brush fingerprint collection window surface may be wet or stained with dirt, it will affect the normal use, in this case we have to use a dry soft cloth to gently wipe.

Tip: Note that it must be dry and soft cloth, so that you can avoid moisture and will not scratch the fingerprint collection window.

Second, the handle does not hang things

Smart lock we use the most a part of the door handle, handle is the key part of the switch door lock, directly affect the use of smart locks, have the habit of hanging things on the door lock partners, it is best to change this habit, even if the hanging time is not long, the number of times will make the handle does not obey, serious will also directly destroy the balance of the handle or directly destroy the handle.

Third, pay attention to the lock body protection

The entire lock body of the smart lock as the human appearance, although the smart lock security is the first priority, but the value is also very important, after all, there are friends to see the lock body first, so do not let the lock surface and corrosive substances in contact, that will destroy the lock surface protective layer, affecting the gloss of the lock surface or cause oxidation of the surface coating. In addition, avoid colliding with hard objects or knocking the shell, easy to damage the surface coating and indirectly affect the internal electronic function of the smart lock.

Tip: Please do a good job of waterproof protection, should try to avoid direct contact with the smart lock to water or other liquids, or immerse it in water or other liquids.

Fourth, mechanical lock hole lubrication

Smart locks are also mechanical lock holes, long time without mechanical keys to open the door, there may be a lock key insertion and removal is not smooth, do not add lubricant indiscriminately. Randomly adding lubricating oil, will be because the oil is easy to sticky dust, slowly accumulate dust, which will make the mechanical lock hole blocked, more prone to failure. At this time, you can smear a little graphite powder or pencil powder in the lock cylinder slot to ensure that the key opens the door normally.

Five, diligent replacement of batteries

We all know that the smart lock is also to install the battery, the use of the battery time is also limited, when the smart lock battery exhausted or when it issues an alarm voltage, we have to replace the battery in a timely manner, for the smart lock battery we have to check diligently diligent replacement.

Tip: Long-term out to remember to replace the new battery to prevent battery breakage, battery fluid corrosion of the internal circuit.

Six, do not hit the door with force

Most of my friends in the door after opening, will always force the door to the door frame, so that it is the most intimate embrace with the door, but this is not the smart lock wants. After we open the door, we should rotate the handle, so that the door latch indent, and so the door and the door frame combined, and then release the hand, do not force the door, otherwise it will reduce the service life of the door lock.

previous： Why is a fully automatic fingerprint lock so worth getting?

next： High-tech live fingerprint recognition smart door lock, reject fake fingerprints

RELATED INFORMATION